CANARO Upgrade Kit
Expedited express via FedEx: USD 37.67
Standard registered via Correo Argentino: USD 27.90
__________
Upgrade kit for Rega turntables: Subplatter, dual 33 pulley, 2 HQ silicone belts. Now incluiding one FREE Ceramic Zirconia Oxide Ball Bearing !
CANARO KIT includes a TANGOSPINNER ASTOR model high-performance sub-platter that has been specifically designed for Rega turntables.
The precision assembly of this sub-platter integrates ideal components into a single sub-platter design which is not available anywhere else – polished aircraft-grade aluminum hub (6061-T6 grade aluminum) with low carbon stainless steel extended spindle (316L) and dual silicone belts to grip the platter and isolate it from vibration.
The use of this single precision assembly sub-platter will enhance the already excellent performance of your turntable in a number of areas:
SPEED STABILITY
The diameter of the polished aircraft-grade aluminum hub is controlled with better precision than the injection-molded plastic Rega hub, for enhanced speed stability/timing.
A dual pulley and double belt SYSTEM can be fitted with this sub-platter, which enhances speed stability even more for better dynamics (this can’t be done with the plastic Rega sub-platter).
PLATTER PROTECTION
The dual silicone rings system, grip and protects the platter to cause scratches or wear.
LOWER NOISE FLOOR
The silicone rings isolate the platter from unwanted bearing vibration – lowering the noise floor.
Stainless steel shaft and matching precision ball bearing lower noise floor and will not wear after 8,000 hours of use (a lifetime!).
RECORD CLAMP
The extended low carbon high tensile steel shaft enables a wide range of record clamp and stabilisers to be used – which further enhance the sound quality.
High Precision tolerances are applied during the manufacture of this sub-platter to ensure low coefficient of friction in use.
Subplatter surface is finished with "mirror-polishing" technique, exception made by subplatter lower axle because of stretch tolerances. Regarding subplatter axle, just its top is polished to have the smoothest spinning.
METAL 33 1/3 RPM DUAL PULLEY
It´s suitable for Rega models: rp1, rp2, rp3, rp5, etc.
Easy plug & play system: no threatening glue. No screw clamps.
SILICONE HIGH-QUALITY DRIVE BELTS
No joints
Optimum gripping
Specially designed for use with metal subplatters
Note: Due to IATA regulations, oils cannot be included in international parcels, so for TangoSpinner products lubrication we recommend semisynthetic SAE15W50 or similar oils.
______
Maximum height oscillation at the edge of a Rega original platter: 0.15 mm
Maximum height oscilation at the edge of a Rega original platter: 0.15 mm
33/33 Aluminium Pulley (with optional upgrade to Brass Pulley)
2 Silicone belts.
1 ceramic zirconia oxide ball bearing
For Rega P1, RP1, P2, P3-24, Planar 2(original version & 2016 version), Planar 3 (original version & 2016 version) , Planar 5, Planar 25.
For Any Rega model that work with a standard height (11.5 mm) subplatter and a MDF fiber, resin, glass, acrylic or Delrin (r) platter.
KIT IS CUSTOMIZED FOR 50 OR 60 HZ, JUST NOTIFY YOUR LOCAL POWER SYSTEM. WE´LL DO THE REST.