DARIENZO UPGRADE KIT
Expedited express via FedEx: USD 40.37
Standard registered via Correo Argentino: USD 29.90
__________
Upgrade kit for RP6 with TTPSU and 2017 Planar 6 REGA turntables: subplatter, triple brass pulley, three red silicone belts. Now incluiding one FREE Ceramic Zirconia Oxide Ball Bearing.
This replica rolex uk high-performance sub-platter has been specifically designed for RP6 with TTPSU and the 2017 Planar 6 REGA turntables turntable. We also manufacture other high-performance sub-platters for other turntables, including Rega (RP3,... etc.).
The precision assembly of this sub-platter integrates ideal components into a single sub-platter design which is not available anywhere else – polished aircraft-grade aluminum hub (6061-T6 grade aluminum) with low carbon stainless steel extended spindle (316L stainless steel) and dual silicone belts to grip the platter and isolate it from vibration.
The use of this single precision assembly sub-platter will enhance the already excellent performance of your Rega RP6 in a number of areas:
SPEED STABILITY
The diameter of the polished aircraft-grade aluminum hub is controlled with better precision than the injection-molded plastic Rega hub (bottom part of 2-piece original sub-platter), for enhanced speed-stability / timing.
The design of this single-piece “hub” is the same height as the combined Rega two-piece sub-platter,replicas de relojes but allows other upgrades. Dual pulley and double silicone belts can be fitted with this sub-platter, which enhances speed stability even more for better dynamics (this can’t be done with the plastic Rega sub-platter).
Note: we also supply dual pulleys and belts for this.
PLATTER PROTECTION
The dual silicone rings grip and protects the platter (no metal to glass or metal to plastic contact – if you use a different platter) to cause scratches or wear.
LOWER NOISE FLOOR
The silicone rings isolate the platter from unwanted bearing vibration – lowering the noise floor.
Hardened steel shaft and matching precision ball bearing lower noise floor and will not wear after 8,000 hours of use (a lifetime!).
RECORD CLAMP
The extended low carbon high tensile steel shaft enables a wide range of record clamps and stabilizers to be used – which further enhance the sound quality.
High Precision tolerances are applied during the manufacture of this sub-platter to ensure a low coefficient of friction in use.
This sub-platter is supplied as a kit which includes:
RP6 and 2017 Planar 6 subplatter as shown in the pictures
Instructions on how to “swap” over the sub-platters
3 High-quality silicone belts
Now including one FREE Ceramic Zirconia Oxide Ball Bearing.
TRIPLE 33 1/3 BRASS PULLEY:
Building on the core design principles of the forthcoming top-of-the-range Rega NAIAD turntable, we have designed, tested, and implemented a triple pulley for use with RP6 with TTPSU and 2017 Planar 6 REGA turntables
Note: Due to IATA regulations, oils cannot be included in international parcels, so for TangoSpinner products lubrication we recommend semisynthetic SAE15W50 or similar oils.
______
This design has been tested by the INTI (Instituto Nacional de Tecnología Industrial - Bs. As. / Argentina).
With deepest thanks to our dear friend Mr. Paul Smith.
This design has been tested by the INTI (Instituto Nacional de Tecnología Industrial - Bs. As. / Argentina).
With deepest thanks to our dear friend Mr Paul Smith.
Brass Pulley.
Red silicone belts.
Ceramic Zirconia Oxide Ball Bearing
Optimal for glass, acrylic or Delrin platters.
For Rega RP6 with TTPSU.
Since all RP6 units work with 50 Hz pulleys, kit will be supllied with that, so in case you need a special 60 Hz, please notify.