What&rsquos a Record Clamp?
THE ESSENTIAL DEVICE TO OPTIMIZE THE PLAYBACK OF YOUR FAVORITE VINYL ALBUMS. Record Clamps help weigh the record down, whether it is to lay it down flatter to the platter or an adjustment over warped records.
Both models work as a clamp and centering devices. These weigh the record flat.
If your records aren't warped at all, the WEight Model can be your best choice. This model only applies pressure over the record and is easier to remove if you tend to flip your records with the platter still spinning. the main difference is that TWISTER II has a grip that grasps the spindle and the record. This model is better for you if you tend to fully stop the record before flipping it.
How to use the TWISTER II MODEL: Place it on the spindle, applying slight downward pressure and a circular motion, then the clamp is easily screwed around the spindle to make contact with the disk surface. To be removed: Simply apply slight circular movements and upward force.
- Stabilize income phono signal to the unit and increase bass response.
- Minimize vinyl pressing problems.
Machined in solid 6061 Aluminium
Maximum diameter 85 mm.
Weight: 0.5 LB aprox.
Elegant matte-polished or mirror-polished finishing.
Revolutionary butyl gripping situated in the clamp lower surface: no slides and label protection guaranteed.
Safe hand gripping.
Also available in Full Black and Full White
BOTH MODELS ARE SPECIALLY DESIGNED FOR USE IN REGA TURNTABLES AND WITH GREAT COMPATIBILITY WITH ANY OTHER TURNTABLE BRANDS.
COMPATIBLE WITH AND REGULAR HOLE AND LARGE HOLE VINYL, whether it&rsquos 33 1/3 or 45 RPM
Why the Bocca Feet Set?
The Bocca feet set is AN ELEGANT AND BEAUTIFUL DESIGN IN SOLID ALUMINUM, INCLUDING NYLON DAMPING ADAPTERS AND ISOLATOR SILICONE PEAKS. It is also a way to level your turntable with ease. UNIVERSAL BOCCA FEET SET: 100% COMPATIBLE WITH THE MOST POPULAR TURNTABLE BRANDS.
Installation is as simple as reliable, just use original screws and original screw holes of your turntable plinth.
Anyway, why upgrade the original feet set of your turntable?
Leveling the turntable is the number one thing to do. These technical reasons can be divided into, at least, three main points:
PREVENTION OF VINYL RECORDS WEAR: Adjustable height feet set works with leveling the turntable as flat as possible. This prevents the needle from working harder, which causes irreparable wear on your favorite records, due to an out-of-standard stylus running performance.
SOUND: Because of an even running of the stylus on the vinyl surface, you will have a noticeable reduction of inner groove distortion issues with a more vivid and clear sound.
MOUNTING: You will feel a firm and safe mounting over any flat surface, even if you need to adjust the height. The Silicone or Urethane peaks bring superb gripping, meeting isolation purposes and bringing tightness to lower frequencies sounds.
When installed every foot can reach different adjustable heights from 29 to 42 mm height.
Maximum diameter 38 mm.
Minimum contact with support surfaces, with maximum efficiency in terms of vibration isolation.
- Silicone peaks for terminal isolation.
- Nylon machined adapters with vibration-damping properties make this set compatible with most turntable brands.
- Double nitrile rubber gripping for a comfortable handling Weight: 60 gr/each.
Finishing: Choose between Mirror polished aluminum or Matte.
Suitable to upgrade original feet set of any turntable, which are mounted to the plinth with screws or bolts up to 7.5 mm in diameter
______
-Adjustable & Isolating BOCCA FEET SET.
-Tangospinner Weight-based or Pressure-based Record Clamps.
